BIOS flash

用户3984

用户3350

2023年12月5日修改

📍

Palmshell Help Center > NeXT H2 Support > BIOS flash

How to flash BIOS with EFI shell

IMPORTANT!

Only update your BIOS if system is unstable or bug solutions correspond with your needs. Flashing BIOS incorrectly has risk to damage your system​

Preparation:

In order to flash BIOS with EFI shell, an update tool, the BIOS image to update with and an USB flash drive is required.​

Tool: AFU – AfuEfi : H2_BIOS_updte_tool.zip

BIOS image: The version to be updated into

Step:

1.
Prepare an USB flash drive (FAT32 format) and extra the BIOS_update_tool file to the root directory of the USB flash driver. Put the BIOS image into this "EFI" folder, then plug in the USB drive to the system you wish to flash BIOS on.​

common.docs_name - LarkCCM_Docs_Menu_Image

2.
Boot from the USB flash driver, run: “afuefi.efi XXX.bin /p /b /n /k /L” to start the flash procedure.​
It shall take a while for the “process completed” message to show up.​
*Note that the names should depend on the tool and BIOS in use.​

3.
After completion, reboot the system and check the BIOS version in BIOS SETUP page.​

BIOS flash​

BIOS flash